11LB-20310 Oil-Water Separation Filter Element Hyundai
R215/225-7/225-9 Excavator Diesel Coarse Filter
1. Filter element
The requirements for oil filter elements are more stringent than
air filters because the oil temperature is between 0 and 300
degrees Celsius. Under severe temperature changes, the oil
concentration will also change, which will affect the filter flow
rate. We provide high-quality oil filter elements that can filter
impurities under severe temperature changes to ensure sufficient
2. Rubber seal
We provide high-quality rubber seals made of special rubber to
ensure good oil tightness.
3. Safety valve
When the engine is stopped, the oil filter is prevented from drying
out; when the engine is started again, it will immediately enter
4. Pressure relief valve
Only high quality filters are provided. Only under certain
conditions can unfiltered oil flow directly into the engine. For
example, the outside temperature of a certain vehicle drops or the
oil filter exceeds the working period. Although some impurities
will be brought into the engine, the loss of empty oil is small.
The safety valve is the key to prevent an emergency situation in
The paper filter element of the diesel filter should be cleaned in
clean diesel oil every 250 hours. The service life of the filter
element is about 500 hours. The service life of the filter element
is closely related to the degree of fuel cleanliness. When it is
found that the surface of the filter element is too dirty or the
filter paper is deformed, it should be replaced in advance. Clean
the filter, use a soft brush to gently brush off the dirt on the
clean diesel oil; in order to prevent dirt from entering the
cavity, it should be made of rubber or cork, and the holes at both
ends should be blocked. When installing the filter element, pay
special attention to the reliability of the end seal and the inlet
and outlet of the oil pipe on the filter seat, otherwise the
filtering effect will be lost.
|Place of Origin||Hebei, China|
|Product name||Diesel Filter Element|
(All filter images are taken in kind. Due to the influence of light
and computer monitors, chromatic aberration may occur. Filters are
subject to actual products.)
Product Quality Commitment :
1. The manufacturing and testing of products have records and
2. For product performance testing, the entire process and
performance must be inspected, and the product will be packaged and
shipped after it is confirmed to be qualified.
Product Price Commitment :
1. In order to ensure the high reliability and advancement of the
product, the selection of the system is made of domestic or
high-quality raw materials.
2. Under the same competitive conditions, our company will
sincerely provide customers with prices on the basis of not
reducing product technical performance and changing components.
After-sales service commitment:
1. Service tenet: fast, decisive, accurate, thoughtful and
2. Service goal: service quality wins customer satisfaction.
3. When necessary, the company sends technical personnel to the
site to guide installation and commissioning, so that customers can
use products with confidence. ...
4. If the product has quality problems under normal use
environmental conditions, we promise to replace the new product or
return the product for you free of charge. ...
5. Long-term ordering service can be provided! ...
6. The delivery cycle is fast, the product quality is tested, and
strictly tested before leaving the factory to ensure that the
high-quality products are delivered to customers. In the market, we
first compare quality. Only with high-quality products can we
survive And the basis of development, and secondly, we compare
prices and hope to deliver high-quality and low-cost products to
customers. Only in this way can it be sustainable! ...
7. Online transactions, honesty is king. we have extremely strict
product requirements and control. All products will undergo three
quality inspections by procurement, QC, and warehouse management
personnel before shipment to ensure that they are shipped to you.
The product is a qualified product.
Our company has passed ISO9001: 2000 international quality
management system certification enterprise. It is located in Gu'an
Filter Industrial Park, 70 kilometers away from Beijing, Tianjin
and Helan, and is an important production area. This is a factory
specializing in the production of internal combustion engines and
industrial filter components. Our company relies on the strength of
the team, with strict standards and a working attitude of pursuing
excellence and self-transcendence, to unswervingly realize our
ideals and goals. Respect the sincere wishes of each customer and
advocate the establishment of a long-term win-win partnership.